DOWNLOAD SPEC SHEET DOWNLOAD USER MANUAL
----------------------------------------------------------------------------------------------------------------------------------------------------
Enerco Hi-Intensity Inrared Heater
Enerco Vent Free High Intensity heaters provide heat through an infrared "radiant" heat process, without the need for outside venting. Infrared “radiant” heaters provide heat by instantly adding warmth to you and objects in the room just like the sun. Think of a cat on a windowsill! Radiant heaters project warmth into the room like sunlight through a window.
High Intensity heaters are ideal for buildings with high ceilings, hard to heat areas, or buildings which require only spot heating are more effectively heated using high intensity infrared heaters.
Because high intensity heaters are "vent free", they do not required outside venting and are 99.9% fuel efficient. Because they don’t require outside venting, no heat is lost.
Infrared Described
Infrared heaters work the same way that the sun does. Infrared rays heat the object directly, not the air around it. When the object becomes hot, it heats the surrounding air and any other objects. With infrared heat, people, machinery, objects and floors all become heat reservoirs -- leading to greater fuel and cost efficiency. It's the perfect heating solution to large buildings like warehouses, machine and auto body shops, terminals, manufacturing plants and farm building
Product Features
• CSA certified ANSI Standard Z83.7/CGA 2.14-2000.
• High intensity heaters have multiple outputs per model series
• Additional burner orifices are included that enables the installer to increase or decrease the output of the heater
• Spark ignition heaters ship with 40VA transformer
• Milivolt control heaters shipped with thermostat
• Non corrosive materials are used throughout heater construction
• Requires outside electrical power source
• 13' -15' Typical Installation Height
• Heats approximately 1100 Sq. Ft
NOTE: ALL 8060 NG HEATERS COME WITH EXTRA ORIFICES TO CONVERT TO 50,000 OR 70,000 BTU
ALL 8060 LP HEATERS COME WITH AN EXTRA ORIFICE TO CONVERT TO 50,000 BTU
| Price | $639.99 |
| Model Name | Garage Heater |
| Manufacture | Enerco |
| User Guide | DOWNLOAD USER MANUAL |
| Product Specs | DOWNLOAD SPEC SHEET |
| Model/SKU # | HS8060 |
| Low BTU Rating | N/A |
| Medium BTU Rating | N/A |
| High BTU Rating | 60000 BTU/hr |
| Valve Positions | Pilot - Hi Output |
| Average Heating Area | 1100 Sq Ft |
| Gas Types Supported | Natural Gas or Propane |
| Ignition Type | Match Light or Auto Pilot |
| Heat Type | Radiant Heater |
| Blower Fan Included? | N/A |
| Blower Fan Operation | N/A |
| Electricity Requirement | None Required |
| Clearance Below Heater | 84 Inches |
| Clearance From Ceiling | 40 Inches |
| Clearance In Front | 30 Inches |
| Clearance In Rear | 30 Inches |
| Clearance On Sides | 30 Inches |
| Thermostat Type | Optional |
| Burner Guard | High Temp Steel |
| Regulatory Approvals | CSA 4.98 U.S. (for use in Califonia) |
| Warranty | 1 Year (on gas controls), 10 Years, (on burner assembly) |
| Dimensions | 45.25"L x 19.25"w x12"H |
| Weight | 35 Lbs |
